Frames for Works on Paper
Standard Frames Thin Frames Ultra Thin Frames Wide Frames New Frames
Frames for Canvases & Panels
Floater Frames Panel Frames New Frames
Metal Frames Mats/Boards/Plexi Other Products Price List PDF
About Our Advice
Matting
Calculations T-Hinge Folded Hinge Mounting Corners
Framing
Joining w/Wedges Joining Floater Frames w/Clamps Framing Depth Purchasing Options
Final Assembly
Wood Frame Assembly Metal Frame Assembly Paintings on Bars/Panels Conservation
Econospace Wood Spacer Wood Strainer Drilled from Side Drilled from Behind
Econospace
Standard Frame Bars Floater Frame Bars Floater Frame Panels

Metal Frame Final Assembly Step 6

Step 1 Step 2 Step 3 Step 4 Step 5 Step 6 Step 7 Step 8
   

3a

        

 Step 6: Turn Upside Down and Attach Fourth Side

Now start lifting up the frame so it is vertical (the bottom of the frame is still on the table). Examine the framed piece so it looks perfect. If there is any dirt or problems correct them.
If everything is okay, turn the frame over carefully so it is now face down on the work surface. Slide the frame over the edge of the table. Take the 4th side (long side) with hardware inserted into each end and slide the last section into the 3 sided frame. Tighten the screws. Examine the framed piece so it looks perfect. Make any adjustments if necessary. Lay the frame back down so the back is facing up.

Previous Step - Next Step